GSM PAKISTAN .TK
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Contact us Fahdi630@hotmail.com
+923339012710

REQ->FBI Process - Box Auth Error 20

View previous topic View next topic Go down

REQ->FBI Process - Box Auth Error 20

Post  Admin on Sun Oct 04, 2009 3:58 pm

DO NOT, perform this process unless you have Box Auth Error 20, update client reports "use Update Firmware to authorise UFS !" or you are advised to do so.

1. Run the update client.
2. Select your language.
3. Click "Next".
4. Wait until the "Update UFS Firmware" button is enabled and then click it.
5. Select req.fbi file, you will need to get this file from the support area.
6. After a few seconds the process will complete and create a file called xxxxxx.req. (where xxxxxx is your UFS serial number)
7. Send this file to your UFS reseller.
8. When you receive xxxxxx.fbi from your UFS reseller, perform steps 1-4 above.
9. Select xxxxxx.fbi
10. After a few seconds your box will be authorised.

Your UFS reseller is the only person who can help with this process, do not ask here in the forum, we will not generate xxxxxx.fbi files for you.

NOTES:-

1. the xxxxxx.fbi file sent by your UFS reseller is one time use only.
2. once you have made the xxxxxx.req file, do not perform any other steps on the box, since this will cause the xxxxxx.fbi file to be out of sync.

Admin
Admin
Admin

Posts : 112
Join date : 2008-04-22
Age : 31
Location : pakistan

http://pakimob.forumn.org

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum